PD15P-FKS-KTT AODD Pumps Compatible With ARO
Completely interchangeable with ARO pumps parts
ARO® is a registered trade mark of Ingersoll Rand Company.
Pumpkits® offers parts that fit ARO products, but they are not genuine ARO parts.
All names, numbers, symbols and descriptions are used for reference purposes only.
It is not implied that any part listed is the product of these manufacturers.
| PD15P-FKS-KTT Product Specific Data | |
|---|---|
| Center Section Material | Polypropylene |
| Connection Type | 1-1/2in ANSI/Din Flange/End |
| Fluid Cap & Manifold Material | Kynar PVDF (Single port) |
| Hardware Material | Stainless Steel |
| Seat Material | Kynar PVDF |
| Ball Material | PTFE |
| Diaphragm Material | Santoprene, PTFE |
| Pump Type | Diaphragm Pump |
| Max Air Inlet Pressure | 8.3 bar (120 psi) |
| Max Material Inlet Pressure | 0.69 bar (10 psi) |
| Max Outlet Pressure | 8.3 bar (120 psi) |
| Max Flow Rate | 123.1 gpm (465.9 lpm) |
| Displacement/Cycle @ 100 psig | 0.617 gal. (2.34 lit.) |
| Max Solid Size | 1/4″ (6.4 mm) |
| Max Temperature Limits | -40 to 350° F (-40 to 177° C) |
| Mounting Dimension | 220.7″ x 379.4″ (8.687 mm x 14.937 mm) |
| Noise Level @ 70 psi, 60 cpm | 81.0 db(A) |
| Ratio | 1:1 |
| Material inlet/outlet (Female) | 1-1/2″ ANSI/DIN Flange |
| Air Inlet (Female) | 1/2- 14 NPT |
| Air Exhaust (Female) | 3/4- 14 NPT |
| Size | 1.5″ (38.1 mm) |
| Maximum Dry Suction Lift | 14 ft (4.2 m) |
| Muffler | 93139 Included |
